2021 Kawasaki KX250 And KX250XC: Everything We Know
New level of off-roading achieved.
Kawasaki is finally summer-ready with a full lineup of off-road and motocross competition-ready motorcycles. A few weeks after confirming which models would carry over unchanged for 2021, Team Green proceeded to unveil the thoroughly upgraded KX250 alongside the all-new competition-ready variant, the 2021 KX250XC.
The 250 was pretty much sent back to the drawing board and returns with significant updates for 2021. We take a closer look at everything new on the KX250. Here’s everything we know about the 2021 model-year.
On the architecture front, the 250 gets a slim new aluminum frame based on 450 chassis that uses the engine as a stressed member. This results in an increased overall rigidity. To match the new frame, the swingarm was also replaced with a unit borrowed from the 450—for improved rigidity purposes as well.
The frame is mounted on a 48mm KYB inverted front fork with 25mm damping pistons and a KYB rear shock paired with dual-compression and high and low-speed damping adjustment. Suspension settings at the front and back have been “fine-tuned” to provide optimal support for the new frame. The 250 ultimately weighs in at a tiny 236.5 pounds ready to go.
From an aesthetic standpoint, the new model-year received a few noticeable tweaks including a flatter, smoother surfaces which, according to Kawasaki, allows the rider to move and shift more easily on the bike. The model also features Kawasaki's proprietary Ergo-Fit system which allows the handlebar and the foot pegs to be adjusted to the size of the rider. New for 2021 is a standard, factory-style aluminum 1-1/8” Renthal Fatbar handlebar.
The 21-inch wheel at the front is armed with a 270mm Braking floating petal disc paired with a dual-piston caliper while the 19-inch rear wheel is equipped with a 240mm Braking disc with a single-piston caliper.
Gallery: 2021 Kawasaki KX250 and KX250XC
The 249cc liquid-cooled thumper received a few upgrades of its own including finger-follower valve actuation, meant to increase the engine’s output and peak power while improving its mid-range performance.
Using the finger-follower valve actuation also allows the engineers to use what is described as a “more aggressive cam profile” as well as large-diameter intake and exhaust valves which result in a higher-revving engine. The KX250 also becomes the first quarter-liter motocross bike with an electric starter, an important move for Kawasaki that explains that a quick restart can make a difference in the rider’s performance on the dirt track. The engine is paired with a five-speed transmission and a segment-first coned disk-spring hydraulic clutch.
Thanks to three differently tuned direct fuel injection (DFI) couplers, the rider can select between three pre-programmed fuel injection and ignition mappings based on the conditions they’re dealing with.
The all-new Kawasaki KX250XC takes all the good stuff the KX250 has to offer and takes it to a higher, competition-oriented level. For a $100 premium. The XC adds trim-specific engine tuning, off-road friendly suspension setup, a 21 and 18-inch set of wheels wrapped in Dunlop GEOMAX AT81 tires, KX250 brakes with Nissin master cylinder and XC-specific pads, a skidplate, and a kickstand. The XC adds four pounds to the standard KX—a small sacrifice to make to take advantage of all the motocross goodies.
The new 2021 Kawasaki KX250 is priced at $8,299 while the 2021 Kawasaki KX250XC goes for $8,399.
RECOMMENDED FOR YOU
Kawasaki Issues A Stop Sale Notice For Turn Signal Recall On Some W230 ABS
Could This Super Popular Indian Electric Scooter Make Sense In The US?
The Kawasaki KRX4 Blackout Edition May Be The One Side-By-Side to Rule Them All
KTM Affirms Its MotoGP Future. Comes After Rumored Exit
Kawasaki Just Built A UTV For Actual Trails Instead Of Instagram Fantasy Land
Brembo's New India Venture Reveals How Modern Motorcycles Really Get Made
Kawasaki Finally Addresses Teryx H2 Stop-Sale Recall. Has A Fix For Its Exploding Gearboxes