After being canned by Harley, Dyno image via BadWeatherBikersHere's what Erik Buell Racing has to say: The 1190RR is the first new motorcycle from Erik Buell Racing. Based on the 1125R and 1125RR, the 1190RR brings engine displacement close to the AMA American Superbike (ASB) class limit for twins and the WSB limit overall. Although it is not currently approved...
After being canned by Harley,
Here's what Erik Buell Racing has to say:
The 1190RR is the first new motorcycle from Erik Buell Racing. Based on the 1125R and 1125RR, the 1190RR brings engine displacement close to the AMA American Superbike (ASB) class limit for twins and the WSB limit overall. Although it is not currently approved for AMA ASB class racing, this bike can be raced in many classes around the world and should add new excitement racing against other premium street-based twin roadracers. The 1190RR models are constructed at our shop from new 1125Rs with a complete kit of Superbike level components. Engines are completely disassembled and blueprinted, with top-shelf internal parts added to deliver reliable performance at the extreme rev ranges required for a twin-cylinder bike to compete at these power levels.
The chassis is completely updated with the finest components, as well as all the details for adjustability and comfort requested by the top test riders who have been involved over its development. Test riding of the 1125RR by Alex Barros, Jeremy McWilliams, Chris Ulrich, Taylor Knapp, Cory West, and more - plus the 1190 motor and a winter of further engine and CFD development - means we can finally deliver an exotic American racing motorcycle that will deliver world-class track performance and excitement for sponsors and fans.
And here's the specs:
Type: 72˚ V-Twin, 4-Stroke, 4-valve DOHC FF valvetrain
Displacement: 1190 cc
Bore and Stroke: 106 x 67.5
Compression Ratio: 14.25:1
Heads: CNC ported
Valves: Titanium, 42.0mm intake, 35.4 mm exhaust
Power: 185 RWHP @11,500 RPM (Dynojet Rear Wheel)
Torque: 93.0 Ft-lbf @ 9,500 RPM (Dynojet Rear Wheel)
Piston: Forged alloy slipper type
Rod: Forged H-beam high strength alloy steel
Crankshaft: Lightweight forged steel
Fuel System: IDS Technology DDFI 3 electronic fuel injection and engine management system, fully programmable, 61mm throttle bodies, dual injector with showerhead, PWM fuel pump
Exhaust: Titanium ultralight 2 into 1 system.
Clutch: Multiplate Slipper
Primary Drive: Straight cut gear, 1.806 ratio
Transmission: 6 speed Ratios: 6th - 24/25 (0.960:1) 5th - 25/24 (1.042:1) 4th - 27/23 (1.174:1) 3rd - 29/21 (1.381:1) 2nd - 28/16 (1.750:1) 1st - 32/13 (2.462:1)
Final Drive: 520 Chain
Frame: Light alloy large section beam with integral fuel cell
Subframe: Light alloy tubular
Wheelbase: Adjustable - 1400 to 1460 mm (55.1 to 57.4 in.)
Rake: Adjustable - 21˚ to 22.5˚
Front Suspension: Showa Race 43mm inverted fork, fully adjustable with BPF technology providing true separation of rebound and compression damping.
Front Wheel Travel: 120mm (4.72 in)
Front Brake: 387.5 mm (15.25 in) semi floating ISO multi-fin rotor with 8 piston ZTL2.5 caliper Front Wheel: 6 spoke ZTL magnesium, 3.50 x 17
Front Tire: 120/17 ZR-17 Pirelli Diablo Corsa III
Rear Suspension: Light alloy swingarm with Showa Race damper, adjustable compression, rebound and ride height.
Rear Wheel Travel: 127 mm (5 in)
Rear brake: 240mm lightweight disc, 2 piston caliper
Rear Wheel: 6 spoke magnesium, 6.00 x 17
Rear Tire: 190/55 ZR-17 Pirelli Diablo Corsa III
Fuel Capacity: 4.6 US Gal
Battery: Buell Li-tech Lithium Nanotech Dry Weight: 360 lbs (wet, no fuel)
Erik Buell Racing